Balustrade Infill
Due to its high surface quality and its advantages, the Solid grating as railing infill used. It is visually appealing thanks to its filling and support bars of the same height.
It can also be powder-coated according to your specifications. Vorgaben pulverbeschichtet (wide color spectrum available).
- Untreated steel
- Galvanized steel
- Stainless steel
- Aluminium
- Power-coated steel
- BB thickness of 2, 3, 4 and 5 mm
- The BB spacing is typically a multiple of 11.
- The IB spacing is typically a multiple of 11.1.
- Standard heights: 20-140 mm.
- Standard thickness: 2-8 mm
- Maximum length of bearer bars: 4000 mm.
- Maximum length of spacers: 2000 mm.
- Galvanized in accordance with EN ISO 1461 standards.
- Stainless steel V2A or V4A available.
- Aluminum available.
- Available with "flat" edge or without edges.
- Available with single or double notching on request.
- HALF-MOON or SAWTOOTH notching available.
GEI press-locked grating is characterized by transverse, cross bars inserted under high pressure into pre-existing notches in the bearing bars. This grating is produced in “flat” or “T”-shaped sections, welded into place and then optionally undergoes hot-dip galvanizing in accordance with the applicable EN ISO 1461 standards. For situations with an increased risk of slipping, anti-slip grating can be produced, where the upper surface of the bearing bars and/or the transverse bars can be given anti-slip serrations. GEI press-locked grating is typically manufactured from EN 10025 standard S235JR steel, which ensures a consistent production quality. RAL-GZ 638 manufacturing tolerances applied.
BBs and TBs fixed in place
Press-locking
Application of banding bars
English