Sun shadings
The press-locked solar shading grille is a design element that delimits rooms or areas, but at the same time provides natural lighting thanks to its translucency and allows you to play with shapes.
For more variety in the design of a building, you can equip the façade with façade grilles whose meshes are aligned with each other.
Moderne Architektur
Manufactured mainly from press-locked gratings, sun-breaker boarding is also available as boarding with slanted struts, as half-iron boarding, in stainless steel and in aluminium.
Herstellung von Gitterrosten nach Maß
GEI can manufacture made-to-measure pressed sun-breaker boarding to meet your requirements (layout, size, etc.). Our research department is available to handle your technical requirements, and can advise you on issues up to and including the realisation of your orders.
- The mesh spacing is defined in accordance with the standards and loads that must be respected:
- For a BB thickness of 2-3 mm:
The BB spacing is typically a multiple of 11.11. - For a BB thickness of 4-5 mm:
The BB spacing is typically a multiple of 18.
The IB spacing is typically a multiple of 17. - Other options are available on request.
- Standard height: 20-150 mm.
- Standard thickness: 2-8 mm
- Other options are available on request.
- Standard height: 10mm
- Standard thickness: 2mm
- Other options are available on request.
- Maximum length of bearer bars: 4000 mm.
- Maximum length of spacers: 2000 mm.
- S235JR steel as per EN 10025 standards.
- Stainless steel 304 ( 1.4301 ).
- Stainless steel 316 ( 1.4571 ).
- AlMg3 aluminium.
- Corten.
- Galvanized in accordance with EN ISO 1461 standards.
- Lacquered in accordance with standard RAL.
- Other options are available on request.
- Available with 'T' or 'flat' edge.
- Available with single or double notching on request.
- Half-moon or sawtooth notching available.
- Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.
- Plain or galvanised ½ laps, panels and staircase steps can be easily assembled on site.
Assembly
GEI press-locked grating is characterized by transverse, cross bars inserted under high pressure into pre-existing notches in the bearing bars. This grating is produced in “flat” or “T”-shaped sections, welded into place and then optionally undergoes hot-dip galvanizing in accordance with the applicable EN ISO 1461 standards. For situations with an increased risk of slipping, anti-slip grating can be produced, where the upper surface of the bearing bars and/or the transverse bars can be given anti-slip serrations. GEI press-locked grating is typically manufactured from EN 10025 standard S235JR steel, which ensures a consistent production quality. RAL-GZ 638 manufacturing tolerances applied.xxx
BBs and TBs fixed in place
Press-locking
Application of banding bars
English 
German