Louvred Gratings

Ultra-design for challenging architectures Architecture

The Slatted grating for a privacy screen effect. is mainly used Architecture by architects because of its ease of use and Designs appreciated, the Slatted grating for a privacy screen effect. has become an essential element in façade design.

It comes in New and old buildings and gives buildings an aesthetic appearance. Due to the generally 45° angled slats, bietet der Slatted grating for a privacy screen effect. , GEI can manufacture made-to-measure pressed sun-breaker boarding to meet your requirements (layout, size, etc.). Our research department is available to handle your technical requirements, and can advise you on issues up to and including the realisation of your orders.

Request express quote

Request by E-Mail

Commercial service

Louvred GEI grating is manufactured according to a precise load table. The dimensions of the bearing bars (BB) are important because they determine the load bearing capacity of the grating.

Mesh center distance

These are decided based on standards and load capacity. For louvred grating, mesh centre distances for the BB and TB are typically in multiples of 11.11. G.E.I has a range of louvred gratings with different mesh available:

100 x 30 – 60 x 30 – 30 x 30.
Other options are available on request.

Dimensions

For optimal grating quality, we advise you not to exceed a height/length ratio of 1.5 m2.

Fastening systems

Fastening systems Fastening systems are manufactured from galvanised steel for steel gratings and from stainless steel for stainless steel and aluminium gratings. In certain cases, gratings may be fixed to structures with welded brackets.

Direction and inclination

Bearer Bar

Standard thickness: 2 to 3 mm. Height of the support and filler bars (mm):

Bearer Bar	25	30	35	40	50	60
Füllstäbe 45° schräg	35	40	50	55	70	85

Material

Steel S235JR according to standard EN 10025. Stainless steel 304 (1.4301) or 316 Ti (1.4571). Aluminum AlMg3.

Finish

Finishes with banding bars

Finishes without banding bars

Manufacturing Principle

GEI louvred grating is characterized by transverse bars inserted at 45° into the bearing bars (please check with us for any other angle). It can then be produced in “flat” sections, welded at right angles to the bearing bars. The grating then optionally undergoes hot-dip galvanizing in accordance with the applicable EN ISO 1461 standards. G.E.I louvred grating is typically manufactured from EN 10025 standard S235JR steel which ensures a consistent production quality.

Custom Manufature

Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.

Our research department is available to handle your technical requirements and your intended layouts, and can advise you on issues up to and including the realisation of your orders.

Sun shadings
Decoration
Ventilation systems
Soundproofing
Flooring
Roofing

Structures

Mesh

Spacing between bearing bars (BB) and transverse bars (TB). Mesh created in this way has two characteristics: mesh width and mesh centre spacing (pitch).

Mesh width: the width of the opening that is between the BBs and TBs
Mesh centre spacing (pitch): the distance between the centre of BBs and TBs (for example, the distance between the centre of one bearing bar and the centre of the nearest adjacent bearing bar

Mesh group | Type

Mesh is made up of two values (in mm), where the first dimension is the distance between adjacent bearing bars, and the second dimension being the distance between adjacent transverse bars (for example: 33.33 x 33.33; 33.33 x 11.11; 55.55 x 55.55; etc.).

For convenience’s sake, the term “mesh gauge” is more frequently used (for example: 30 x 30 – 30 x 10 – 50 x 50 – etc.)

Bearing bars (BB)

Straight rods bearing the weight and arranged in rows at right angles to the transverse bars and supports.

Transvers bars or cross bars (TB)

Inserted at 45° into the bearing bars (contact us for any other degree of inclination), the BIs are assembled to the BPs by pressing.

BB and TB gauge

This is defined by two values (in mm), where the first corresponds to their height and the second to their thickness. Gauge examples: 30 / 2; 30 / 3; 40 / 3; etc…

Range

Gap between the supports on which the ends of the bearing bars rest.

Impermeability – security bars Sicherheitsmasche

Security mesh uses the following mesh gauge: 30 x 19; 19 x 30; 19 x 19; etc. It is recommended for industrial environments (14122 standard) and allows nothing exceeding a 20 mm diameter ball to pass through it.