sheet profile gratings,
PS-CRANT
Used in Safety Grilles Due to its serrated surface, PS-CRANT is characterized by high Slip resistance out. It is particularly suitable for the automotive, construction and industrial sectors.
Maximum lengths:
- Untreated or galvanised steel: 6,000 mm.
- Untreated or pickled 304 or 316 stainless steel: 2,000 mm.
- Aluminium: 6,000 mm.
Standard widths:
For the full range of materials and finishes: 120 mm / 180 mm / 240 mm / 300 mm / 360 mm / 420 mm / 480 mm.
Standard height:
For the full range of materials and finishes: 40 mm / 50 mm / 75 mm.
PS-PERF
Used in Safety Grilles PS-PERF safety grid has excellent grip due to the perforations at the top which allow liquid to drain through.
Maximum lengths:
- Untreated or galvanised steel: 6,000 mm.
- Untreated or pickled 304 or 316 stainless steel: 2,000 mm.
- Aluminium: 6,000 mm.
Standard widths:
For the full range of materials and finishes: 150 mm / 200 mm / 250 mm / 300 mm.
Standard height:
For the full range of materials and finishes: 30 mm / 40 mm / 50 mm / 75 mm.
PS-FERM
PS-FERM safety grid is perfect for areas to which access is restricted and where traffic safety must be guaranteed (this is the only product in our range which has no openings to see through).
Maximum lengths:
- Untreated or galvanised steel: 6,000 mm.
- Untreated or pickled 304 or 316 stainless steel: 2,000 mm.
- Aluminium: 6,000 mm.
Standard widths:
For the full range of materials and finishes: 150 mm / 200 mm / 300 mm / 400 mm.
Standard height:
For the full range of materials and finishes: 40 mm / 50 mm / 75 mm.
PS-OVA
PS-OVA safety grid has a very high load-bearing capacity. This kind of grid is often used for facade cladding.
Maximum lengths:
- Untreated or galvanised steel: 6,000 mm.
- Untreated or pickled 304 or 316 stainless steel: 2,000 mm.
- Aluminium: 6,000 mm.
Standard widths:
For the full range of materials and finishes: 150 mm / 200 mm / 250 mm / 300 mm.
Standard height:
For the full range of materials and finishes: 30 mm / 40 mm / 50 mm / 75 mm.
PS-OFF
PS-OFF safety grid has the same advantages as PS-PERF safety grid. It grips extremely well due to the perforations stamped at the top end which allow liquid to drain through.
Maximum lengths:
- Untreated or galvanised steel: 6,000 mm.
- Untreated or pickled 304 or 316 stainless steel: 2,000 mm.
- Aluminium: 4000 mm.
Standard widths:
For the full range of materials and finishes: 150 mm / 200 mm / 250 mm / 300 mm.
Standard height:
For the full range of materials and finishes: 40 mm / 50 mm / 75 mm.
PS-PMR
PS-PMR safety grid is specially designed for people with reduced mobility thanks to its 8 mm diameter perforations. In addition to the dimensions, many options are possible depending on the configuration of the installation site.
Maximum lengths:
Untreated or galvanised steel: 6,000 mm.
Aluminium: 6,000 mm.
Standard widths:
200 mm / 250 mm / 300 mm. Maximum width: 330 mm.
Standard height:
50 mm. Possible up to 75 mm.
GEI offers a wide range of stairs in safety grids with the following stamps:
PS-CRANT
In stock
PS-PERF
In stock
PS-OFF
On demand
PS-OVA
On demand
PS-FERM
On demand
PS-PMR
In stock
| Width of the step (in mm) | from 150 to 159 | from 160 to 169 | from 170 to 179 | from 180 to 189 | from 190 to 199 | from 200 to 249 | from 250 to 279 | from 280 to 309 | from 310 to 339 | from 340 to 369 |
| Dimensions d | 70 | 80 | 90 | 100 | 110 | 120 | 150 | 180 | 210 | 240 |
Other dimensions for drill holes in stair risers on request.
- Ready for use step kit, made up of left and right sides and fasteners
- Time saving
- The length of our grids can be adjusted easily (by the customer) to the required dimensions
- Step kit that adapt to all types of stringer
- Available in two heights (50 and 75 mm)
Screw head: top view
Grid with contrasting nosing: the nosing may be painted black or yellow
Shipment within 24/48 hours: Grids in stock and immediately available:
- 3996 x 330, 50 mm high, 2 mm thick (max. recommended step length: 1100 mm)
- 4200 x 330, 75 mm high, 2 mm thick (max. recommended step length: 1600 mm)
Manufacturing Principle
Manufactured using techniques that ensures a consistent production quality, GEI safety grids meet current safety standards. GEI safety grids are manufactured with tolerances in accordance with the RAL-GZ 639 standards.
Material
- S235JR steel as per EN 10025 standards.
- Stainless steel 304 ( 1.4301 ).
- Stainless steel 316Ti (1.4571).
- AlMg3 aluminium.
Surface Treatment
- Untreated or galvanised steel
- Untreated or pickled steel
- Aluminum raw, pickled or anodized.
Thicknesses
- Untreated or galvanised steel: 1.5 mm / 2 mm / 2.5 mm.
- Untreated or pickled 304 or 216 stainless steel: 1.5 mm / 2 mm.
- Aluminium: 2 mm / 2,5 mm / 3 mm
English 
German