FRP grating
The one in the Architecture used Polyester Grating for shelving offer numerous benefits
- Light
- Wide range of colours
- Ease of use: can be cut cleanly and easy to realise.
- Indoor and outdoor use
Whether as a non-skid flooring for grassy areas, as a light well or for a range of other uses, fiberglass gratings have become the must-have product in recent years. Polyester Grating has become a trend product in recent years.
GEI can manufacture made-to-measure steps to meet your requirements (layout, size, etc.). Profiles for balustrades and ladders with or without hoops can be manufactured on request.
- 38 x 38 - 26 x 26 - 50 x 50 - etc...
- Security bars: 19 x 19.
- Standard dimensions: 30 / 7; 38 / 7 and 50 / 7 mm.
- 1000 x 2026 mm.
- 1000 x 3055 mm.
- 1220 x 3055 mm.
- 800 x 275 mm.
- 1000 x 275 mm.
- 1000 x 350 mm.
- Concave.
- Grit.
- Entirely grit-covered surface.
- We stock mats, stair treads and stair rails which are easy to assemble on site.
- Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.
Moulded FRP grating is manufactured from fibreglass-reinforced resin. It is composed of 65% resin for its chemical and UV resistance and is composed of 35% fibreglass for increased mechanical strength. GEI has 3 types of resin on offer with different degrees of resistance to chemical corrosion.
In stock
Isophthalic resin, fire retardant M1/F1 and resistant to corrosion and chemical products.
Vinylester resin resistant to the most severe chemical attack (high concentrations).
Grey
RAL 7035
Beige
RAL 1001
Basalt grey
RAL 7012
Green
RAL 6010
Orange
RAL 2002
About Manufacturing
Orthophthalic resin resistant to a wide range of chemicals.
GEI also offers a range of accessories and special fastening systems for FPR gratings:
316 stainless steel clamp with 19 x 19 mesh washer. In stock.
316 stainless steel clamp with 30 x 30 mesh pin. In stock.
316 stainless steel stair support for 30 x 30 and 19 x 19 mesh. In stock.
Adjustable foot.
Dimensions of insert: 35 x 35 mm.
Thickness of insert: 20 mm.
Height of foot: 40 or 70 mm.
In stock.
FRP support bracket
Standard length: 3,000 mm.
Dimensions: 30 x 30 x 5 mm
and 50 x 50 x 6.35 mm.
Can be cut to size.
In stock.
English