Press-locked stainless steel
The Corrosion-resistant grating off Stainless steel is in the industry for the Food sector and the Petrochemical suitable.
Stainless steel 304 (1.4301) is mainly used in the food sector, while Stainless steel 316Ti (1.4571) is used in areas where high corrosion resistance is required (Sea Air, ect.).
Benefits of press-locked stainless steel gratings:
- Can be manufactured with single or double notching for use in slippery inside or outside conditions.
- For use for heavy loads, trucks or cars.
- Quick assembly with retaining fasteners.
- Safety : stainless steel gratings can be manufactured from strips with no sharp edges to ensure they can be handled without risk of injury.
Custom Manufacture
GEI can manufacture made-to-measure press-locked stainless steel gratings to meet your requirements (layout, size, etc.). They are also available as panels and as straight or spiral staircase steps with non-skid noses and lateral covers.
Several finishes available:
- Untreated (welding points will be more visible and thus less visually appealing)
- Blasted
- Electropolished
- Anodised
- The mesh spacing is defined in accordance with the standards and loads that must be respected:
- For a BB thickness of 2-3 mm:
The BB spacing is typically a multiple of 11.11. - For a BB thickness of 4-5 mm:
The BB spacing is typically a multiple of 18.
The IB spacing is typically a multiple of 17. - Other options are available on request.
- Standard height: 20-150 mm.
- Standard thickness: 2-8 mm
- Other options are available on request.
- Standard height: 10mm
- Standard thickness: 2mm
- Other options are available on request.
- Maximum length of bearer bars: 4000 mm.
- Maximum length of spacers: 2000 mm.
- Stainless steel 304 ( 1.4301 ).
- Stainless steel 316 ( 1.4571 ).
- Galvanized in accordance with EN ISO 1461 standards.
- Lacquered in accordance with standard RAL.
- Other options are available on request.
- Available with 'T' or 'flat' edge.
- Available with single or double notching on request.
- Half-moon or sawtooth notching available.
- Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.
- Plain or galvanised ½ laps, panels and staircase steps can be easily assembled on site.
Assembly
GEI press-locked grating is characterized by transverse, cross bars inserted under high pressure into pre-existing notches in the bearing bars. This grating is produced in “flat” or “T”-shaped sections, welded into place and then optionally undergoes hot-dip galvanizing in accordance with the applicable EN ISO 1461 standards. For situations with an increased risk of slipping, anti-slip grating can be produced, where the upper surface of the bearing bars and/or the transverse bars can be given anti-slip serrations. GEI press-locked grating is typically manufactured from EN 10025 standard S235JR steel, which ensures a consistent production quality. RAL-GZ 638 manufacturing tolerances applied.xxx
BBs and TBs fixed in place
Press-locking
Application of banding bars
English 
German