PRESS-GITTERROSTE FÜR REGALANLAGEN
GEI press-locked gratings for shelving can be used for pallet racks and grating cantilevers, for storing heavier loads without the need for increased load absorption by the butt joints. Gratings for shelving are manufactured from S235JR steel and are also available with an press-welded finish.
DER REGALROST WEIST ZAHLREICHE VORTEILE AUF, U. A.:
- Provide excellent rigidity and stability for items stored
- Allows better visibility of items stored
- Light can get through
- Water can get through
- Easy and quick to assemble
Several finishes available
- Untreated
- Galvanized
- Power-coated steel
JE NACH UMFELD UND IHREN ANFORDERUNGEN SIND VERSCHIEDENE AUSFÜHRUNGEN MÖGLICH:
A) Corner flap
This grating is particularly suitable for shelving with reduced-width shelves. Load absorption will be limited.
B) Flanged edge
This grating is suitable for various types of shelving and offers numerous advantages, the most important of which is its cost of manufacture. The butt joint between the two edges provides greater load absorption and safety, and the flanged edge locks the grating in place on the racks.
C) Flat edge
This grating offers good adherence and stability thanks to the contact between the lips on the underside and the racks.
D) Notched edge
The butt joint between the two edges provides greater load absorption and the flanged edge provides safety.
Mesh
- The mesh spacing is defined in accordance with the standards and loads that must be respected:
- For a BB thickness of 2-3 mm:
The BB spacing is typically a multiple of 11.11. - For a BB thickness of 4-5 mm:
The BB spacing is typically a multiple of 18.
The IB spacing is typically a multiple of 17. - Other options are available on request.
Bearer Bar
- Standard height: 20-150 mm.
- Standard thickness: 2-8 mm
- Other options are available on request.
FÜLLSTÄBE
- Standard height: 10mm
- Standard thickness: 2mm
- Other options are available on request.
Dimensions
- Maximum length of bearer bars: 4000 mm.
- Maximum length of spacers: 2000 mm.
MATERIALEN
- S235JR steel as per EN 10025 standards.
- Stainless steel 304 ( 1.4301 ).
- Stainless steel 316 ( 1.4571 ).
- AlMg3 aluminium.
OBERFLÄCHENBEHANDLUNG
- Galvanized in accordance with EN ISO 1461 standards.
- Lacquered in accordance with standard RAL.
- Other options are available on request.
Finish
- Available with 'T' or 'flat' edge.
- Available with single or double notching on request.
- Half-moon or sawtooth notching available.
Finished Product
- Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.
- Plain or galvanised ½ laps, panels and staircase steps can be easily assembled on site.
Assembly
GEI press-locked grating is characterized by transverse, cross bars inserted under high pressure into pre-existing notches in the bearing bars. This grating is produced in “flat” or “T”-shaped sections, welded into place and then optionally undergoes hot-dip galvanizing in accordance with the applicable EN ISO 1461 standards. For situations with an increased risk of slipping, anti-slip grating can be produced, where the upper surface of the bearing bars and/or the transverse bars can be given anti-slip serrations. GEI press-locked grating is typically manufactured from EN 10025 standard S235JR steel, which ensures a consistent production quality. RAL-GZ 638 manufacturing tolerances applied.xxx
BBs and TBs fixed in place
Press-locking
Application of banding bars
English 
German